Description
These laser cut Tubela Stand components are to help you to weld up a stand, to aid you in the operation of your Tubela Model 3 or Model 32 Tubebender.
You get either a complete Stand to weld together:
A Base Plate - 12mm thick mild steel, 26cm sqaure. With 4 x 1/2" clearance holes to provide a very secure platform.
The Base Plate has the 2"NB Support diameter cut out to enable you to get welds on both sides of the plate, to make the stand stronger. And to aid in welding it up making easy alignment in a vice.
A Tube Support - 2"NB (60.3mmOD) x sch80 5/5.5mm thick steel pipe.
A Top Plate - 10mm thick mild steel, with the must have Petal design that allows those with space restrictions to move the tubebender around when your long piece of tube may interfere with a fixed obstruction, like a wall. You simply release the main bolts, pulling the outer one up, rotate the machine, secure and bend. The holes are at 45deg increments.
Or, just the Top & Base Plates.
All YOU need to do is weld one of your tubebenders 3/4" nuts to the centre hole in the Top Plate, and weld the parts together.
A FULLY WELDED option is now available, undertaken by a skilled welder. So all you need to do is paint and bolt it to the floor.
The Stand is a comfortable 94cm (3ft1") approximately high, and has four wide spread holes in the base for easy bolting to a concrete or metal floor to provide a secure footprint. If you are very tall then maybe we can cut a higher Tube Support for you.
As with everything Tubela, its over engineered to be strong and to last.
